How To Build A Window Network 7
In principle, there's nothing complicated about the network, and if you're lucky to have more than one computer at home, with the force being distributed equally between Apple and the so-called PC, you can use the slogan "Mir, friendship, gum" in practice.
We'll assume that you, like me, have an ADSL-mode with a rooster function and a scroll or a built-in scroll fashion, that's with a few LANports. We also suggest that computers are successfully connected to a network cable, and that only remains to be able to see each other and to exchange information freely.
Let's start with Vista. Let's go first. Control system♪ Data on the name of the computer and the working group. Note that both names should be written exclusively by Latin letters and should not contain non-standard symbols. In addition, the working group on all computers in the network should be called the same.
Then we move in. Status Circulation on the local network. We see the local network connected. We further press the " Power " button and note the " Internet Protocol of Version 4 (TCP/IPv4) " , as this data transfer protocol is now being used everywhere. Then handwritten IP parameters: IP address, subset mask, main lock. Generally, addresses are standard: for example, the main lock is 192.168.1.1 (mode). After we've made the values, we'll push the OC.
We are now going to the Network Management and Access Centre and are building common access and networking. We allow general access to files and general access to folders. We can also see which files and files on this computer are common. In order to turn the normal folder into a common folder, we need to press it on the right button of mice, move into a web of access Circumstantial access where access to the folder is allowed.
Now we need to build the same parameters on the Mac. We go to System Buildings, select the type of connection. As mentioned at the beginning of the material, in our case this is Ethernet. IPv4. IP address: write our poppy address and the router is the same as the main lock. There should be no problem with that. In addition, we press " Further " , we move to the WINS contribution (Windows Internet Name Service) and indicate the name of the working group. It should coincide with the name of the working group on all other network computers.
