How To Establish A Local Network

Как создать локальную сеть на пк windows xp — Строительные материалы

How To Establish A Local Network

Изображение с названием Create a Local Area Network (LAN) Step 14 Start the router. The construction of the wireless router should take into account several things:

For simpler diagnostics, the router should be placed next to the modem.
Place it in the centre of the room to ensure maximum coverage of the wireless network.
The router will need to be connected to the computer through Ethernetport.

Connect the computer to one of the LAN portals. Construction wireless network on the router will be conducted via the browser on the computer.

Start the browser on the computer. Any browser will fit for that purpose.

Introduce the IP router. It is generally printed on the lower part of the router or the attached documentation. Изображение с названием Create a Local Area Network (LAN) Step 15

Изображение с названием Create a Local Area Network (LAN) Step 15

If you can't find it, try the following options:

Windows lick the right button of the Soet, which is on the range of tasks , select the " Network Control and General Access Centre " , brace the reference to the Ethernet Circumni " IP-reser will be listed in the " Silence Sloose " line.
Mac - press the menu of Apple and select the " System Buildings " .

Enter the system under the records of the administrator. You'll be asked to install records to access the router construction. Default records are generally dependent on the router model, but the user ' s name is usually "admin " and " -admin " password " or empty line.

The router model can be viewed on the site: You can find entry records.

Open the Wireless section on the router construction. The exact location and title of this section depends on the router used.

Change the name of your network in the SSID field or Network name/network name. That name will be displayed on the list of accessible wireless networks.

Choose WPA2-Personal in Authentication/Authentication or Security/Security. It's the safest security protocol available on most routers. Use WPA and WEP only if necessary to connect old, incompatible devices.

Make a solid password. This password will be used to connect to the network. This field can be marked as Pre-Shared Key/Green Coding.

Make sure the wireless network was on. Depending on the router, you may have to put a box or press the button on the top of the Wireless menu to include a wireless network.

Press Save/Save or Apply/Service to maintain the changes in the router.

Wait till the router reset. If the router and the network are back on track, it might take a minute.